GPON OLT 9700 4P/8P/16P

TAINET OLT 9700 Series complies with ITU-T G.984/G.988 and meets requirements about GPON OLT in Network Access Technical Requirements. TAINET OLT 9700 Series supports the Asymmetric uplink 1.25Gbps/downlink 2.5Gbps PON transmission rate, efficient bandwidth usage and Ethernet services, helping carriers to provide reliable services to their users. Its coupling ratio ups to 1:128, and its support of different hybrid ONU networks minimize the carrier’s investment.  TAINET OLT 9700 Series, based on the edge-cutting technologies, is strong in functions. A few of its functions such as QoS guarantee, SLA and DBA can be easily listed out.



  • Support ITU-T G.984/G.988, meets relevant requirements of GPON OLT regulated in Network Access Technical Requirements
  • 4 gigabit SFP ports, 4 gigabit combo ports and 4 10GE SFP+ ports.
  • Low power consumption and low operating cost
  • The link can be automatically switched when trouble occurs in the optical fiber
  • Supports dual-AC, dual-DC and AC/DC power supply. The power supply supports modularized design, hot-swap and EMC-3 standard. It well adapts to the environment.


  • Model
    • OLT 9700/4P: 4 PON, 4*10GE ports or 4*GE ports (4*Gigabit TX ports)
    • OLT 9700/8P: 8 PON, 4*10GE ports or 8*GE ports (4*Gigabit SFP ports, 4*Gigabit TX/SFP combo ports)
    • OLT 9700/16P: 16 PON, 4*10GE ports or 8*GE ports (4*Gigabit SFP ports, 4*Gigabit TX/SFP combo ports)
System Capacity
  • Maximum coupling ratio: 1:128
  • Backplane bandwidth: 176G
  • MAC table capacity: 40K
PON Interface
  • Downlink 2.5Gbps / Uplink 1.25Gbps
  • Class B+ and Class C+ GPON module
  • Security: ONU authentication mechanism
  • ITU-T G.984/G.988
  • IEEE 802.1D Spanning Tree
  • IEEE 802.1Q VLAN
  • IEEE 802.1w RSTP
  • IEEE 802.3ad physical link static/dynamic aggregation (LACP) Ethernet – II
  • Port/IP/Protocol/MAC-based VLAN
  • 4K VLAN
  • QinQ and flexible QinQ
  • L2 Multicast
  • IGMP Snooping
  • MLD-Snooping
  • Fast-leave
  • Backpressure flow control (half duplex)
  • IEEE 802.3x flow control (full duplex)
  • IEEE 802.1p CoS
  • WRR, SP and FIFO queue schedule
  • Limiting the uplink/downlink rate based on each ONU
  • DBA and SLA
Layer 3 Function
  • Static route
  • RIPv1/v2
  • OSPF
  • BGP
  • CLI, Telnet, SSH, HTTP, SSL and SNMP
  • ISSU
  • Unidirectional Link Detection (UDLD)
  • Hot swap of the EPON optical module
  • Type B optical protection
  • Abnormal luminescence ONU detection such as long luminescence
  • IEEE 802.3ad LACP
Network Security
  • L2~4 ACL
  • Flow-based ACL
  • MAC limitation
  • MAC sticky
  • Port isolation
  • Packet storm control
  • Transmission data encryption on the PON interface
  • Anti attack for DDOS, TCP-SYN-flood, UDP-flood, ARP-flood, etc.
Network Availability
  • BPDU guard
  • EAPS
Physical Characteristics
  • 442.5(W) x 304(D) x 44(H) mm
  • Installation: standard 19-inch rack-mounted
  • Weight: 5.5Kg
Heat Dissipation
  • Supports long-time use
  • The device running hot will not affect the performance or cause break down
  • Operating temperature: 0℃ ~ 50℃; 10% ~ 85% non-condensation
  • Storage temperature: -40℃ ~ 80℃; 5% ~ 95% non-condensation
Power Supply
  • Input voltage: AC 100~240V, DC 36~72V
  • Dual-power input, DC/AC power supply and hot-swap