Industrial Grade Fiber Ethernet Converter (ENTU763HS+) FE and GE are manageable type media converter that is interoperable with Ethernet Access Chassis (iEAC-16). The customer premise allows the operator to reach the customer over fibre, while still providing a standard Ethernet copper connection.
Features
- Comply with IEEE 802.3, 802.3u, 802.3ab and 802.3z Ethernet Standard
- Support IEEE 802.3ah In-band and TS 1000 OAM management
- Front-panel test button to trigger auto loopback test
- Comply with SFF-8472 industry-standard and support SFP DDM (Digital Diagnostics Monitoring)
- Support WDM Bi-directional SFP module with specific wavelength for various distance
- Support copper line cable diagnostics feature
- Comply with IEEE 802.1q Tag VLAN
- Support Q-in-Q function
- Maximum Frame size 9K bytes
- Ethernet bandwidth Control
- Support 10/100BASE-TX and 10/100/1000BASE-T, Flow Control, Auto MDI/MDIX, and Manual setting
- LED indicators for ease of network diagnostic
- Support Link Status Transparent
- Alarm: Interruption to Electrical / optical interface、Power failure、Thermal failure on Chassis and Login UNMS system failed、SFP DDM
- Firmware upgrade via HTTP
- In-band IP NMS Interface supported
- Centralized management for CO-side equipment
- iEAC-16 chassis supports 16 Line cards
- Report all alarm status to the designated NMS and computer terminal interface
Specifications
Models
- ENTU 763HS+/GE, industrial standalone Gigabit Ethernet NTU Standalone and card type versions can be placed in CPE and CO equipment.
Network Interface
- Connector type: SFP-LC
- 100Base-FX or 1000Base-X SFP port
- Support SFP DDM (Digital Diagnostic Monitoring): Compliant with SFF-8472 SFP DDM (Digital Diagnostic Monitoring), temperature, supply voltage, bias current, transmitted power, received power
- 100BASE-FX with the transmission speed of 100Mbps, 1000BASE-FX with the transmission speed of 1000Mbps, single-core bidirectional SFP module
- For detailed wavelength and distance of SFP modules, please
- refer to SFP Transceivers datasheet
User Interface
- Connector type: Shield RJ-45 jack
- 10/100Base-Tx / 1000Base-T
- Auto-MDI/MDIX detection and Manual setting
- Auto-negotiation 10/100Base-TX for speed and Full duplex / Half
- Support 10/100/1000Base-T for speed and Full duplex
- Support copper line cable diagnostics feature
- Complies with IEEE 802.1q Tag VLAN (including Q-in-Q)
- Ethernet bandwidth control and support Jumbo frame
Management & OAM Functions
- Configuration via DIP switch
- Configuration via craft port VT-100 and WEB GUI
- Console: RJ45 connector (RS232C)
- HTTP firmware upgrade
- RMON counter
- Front-panel test button for easy loop healthy testing
- Reset button back to factory default
- Support warning threshold for setting the upper and lower limit of optical parameters. When parameters monitor reaches the limit, it will send a warning message
Management & OAM Functions
- Support IEEE 802.3ah Link Layer OAM
．Auto discovery
．Link monitoring
．Remote loopback test
．Remote fault detection
．Link Fault Reflection Dying Gasp
．Critical Event
- Support TS-1000 OAM
．Loopback test
．Reset remote device
．Get remote device information
．Remote port setting
LED Indicators
- PWR, LNK, CO, TST, DPX, RF, LAN LNK/SPD
Power Requirement
- AC/DC, DC/DC external power adapter (12V, 0.5A)
- Power consumption: = 3.3W
Dimension
- 87(W) x 172(D) x 24(H) mm
Operating Environment
- Operating temperature: 0 o C ~ 65 o C
- Storage Temperature: -20 o C ~ 70 o C
- Humidity: 90%, non-condensing
Application
