Ethernet Access Chassis (iEAC-16), is a 2U high 19-inch chassis containing a controller MCU-16, redundant AC/DC power modules and 16 slots for various types of line cards. Including TDM over IP (FNTU), Media Converter (ENTU) and G.SHDSL.bis (SNTU), all modules are hot-swappable, managed through Web GUI, CLI (Telnet and craft port).
By using different types of the line card, iEAC-16 can extend Fast/Gigabit Ethernet traffic on 10/100/1000 Base-TX over 100/1000 Base-FX optical fibre, and G.SHDSL.bis line with 2W/4W/8W.
Features
- Designed for high-density Ethernet extender installations in central offices or enterprises
- Carrier Level Ethernet network over Optical fibre, G.SHDSL.bis and VDSL2 copper lines
- Manageable chassis: Web GUI, CLI
- Provides Fiber-Optic network traffic connection and conversion
- Multi-pair copper bonding for double or quadruple bandwidth
- Enables link-layer OAM on the networks and equipment
- Link Diagnostics with one push button
- Hot-swappable for all cards, Redundant powers and Green FAN available
Specifications
Model
IEAC-16, 19″ chassis shelf with 16 slots for line cards
IEAC-AC: AC Power Input: 100 ~ 240V, 50/60Hz (160W)
iEAC-DC: DC Power Input: -36 ~ -72V (160W MTR-AC, 90~260VAC Power Module
- iEAC-16: Intelligent Ethernet Access Chassis
- MCU-16: Controller of iEAC-16 with NMS/WEB agent
- FNTU 761C/GE: 802.3ah Gigabit Ethernet Fiber MUX Network TDM Unit with Balanced E1(RJ-48)
- FNTU 761CU/GE: 802.3ah Gigabit Ethernet Fiber MUX Network TDM Unit with Unbalanced E1(BNC)
- ENTU 763C/GE: 802.3ah Gigabit Ethernet with a 1.25G SFP Transceiver slot; Optional SFP trunk module selectable; Card type
- ENTU 763C/FE: 02.3ah Fast Ethernet NTU with a 155M SFP Transceiver slot; Optional SFP trunk module selectable; Card type
- ENTU 763GO: Optical-Electrical-Optical Converter; Card type
- SNTU 764C/2W: G.shdsl.bis 2-wire RJ-45 to 10/100Base-TX RJ-45, Card type
- SNTU 764C/4W: G.shdsl.bis 4-wire RJ-45 to 10/100Base-TX RJ-45, Card type
- SNTU 764C/8W: G.shdsl.bis 8-wire RJ-45 to 10/100Base-TX RJ-45, Card type
- SNTU 765C/4W: G.shdsl.bis 4-wire RJ-45 to 10/100Base-TX RJ-45 and E1 interface, Card type
- VNTU 766C: VDSL RJ-11 to 10/100Base-TX RJ-45, Card type
- VNTU 766CX: VDSL BNC to 10/100Base-TX RJ-45, Card type
Physical Slot
- iEAC-16 chassis contains a controller MCU-16, redundant AC/DC power modules and 16 slots for three types of line cards. Including FNTU, ENTU, SNTU and VNTU, all modules are hot-swappable, managed through Web GUI, CLI (Telnet and craft port).
Optical Interface
- Connector type: SFP-LC
Ethernet Interface
- Connector type: Shield RJ-45 jack
- ENTU 763S/FE: 100Base-FX SFP modules
- ENTU 763S/GE: 1000Base-X SFP modules
LED Indicators
- MCU-16: MAJ/MIN ALM, FAN, FAN ON, PWR1, PWR2, ETH LNK/SPD
- FNTU: PWR, LNK, TST, ALM, E1, LAN Tx/Rx, LNK/SPD
- ENTU: PWR, CO, LNK, TST, RF, TP, LAN LNK/SPD
- SNTU: PWR, CO, ALM, TST, L1~L4, ETH LNK/SPD
- VNTU: PWR, CO, LNK, TST, LAN LNK/SPD
Power Requirement
- Hot Swappable Redundant Power Modules:
- DC: -36 ~ -72 VDC;
- AC: 100 ~ 240V, 50 ~ 60Hz
Dimension
- Line cards:84(W) x 168(D) x 24(H) mm.
- iEAC-16: 480(W) x 366(D) x 89(H) mm.
Operating Environment
- Operation temperature: 0oC ~ 50oC
- Storage temperature: -25oC ~ 70oC
- Relative humidity: up to 90% (non-condensing)
Fibre Devices, VOIP Gateway, xDSL Modem, PON, Optical Transceiver, L3 Switch, Residential Gateway
Application
