Fibre Ethernet Converter (ENTU763) FE and GE are so-called Ethernet Access Devices (EAD), Ethernet Media Data Converter (MDC) or Ethernet Fiber-optic Modem (FOM). It is a manageable type of media converter that is interoperable with Ethernet Access Chassis (iEAC-16). The customer premise allows the operator to reach customers over fibre, while still providing a standard Ethernet copper connection.
Features
- Comply with IEEE 802.3, 802.3u, 802.3ab and 802.3z Ethernet Standard
- Support IEEE 802.3ah In-band and TS 1000 OAM management
- Front-panel test button to trigger auto loopback test
- Support SFP DDM (Digital Diagnostics Monitoring)
- Support WDM Bi-directional SFP module with specific wavelength for various distance
- Support copper line cable diagnostics feature Comply with IEEE 802.1q Tag VLAN
- Support Q-in-Q function
- Maximum Frame size 9K bytes
- Ethernet bandwidth Control
- Support Flow Control, Auto-Crossover for MDI/MDIX on TP port LED indicators for ease of network diagnostic
- Support Link status Transparent Prompt indication on network failure
- Firmware upgrade via HTTP
- Built-in IP-based WEB GUI configuration and maintenance Centralized management for CO-side equipment
Specifications
Models
- ENTU 763S/GE, stand-alone Gigabit Ethernet NTU
- ENTU 763S/FE, stand-alone Fast Ethernet NTU
- iEAC-16, 2U 19” Rack, 16 slots for line card
- Controller with NMS/WEB agent (MCU-16)
- Hot-Swappable Redundant AC/DC Power Modules (iEAC-AC or iEAC-DC)
- Green FAN facility, ON and OFF by internal temperature (iEAC-FAN)
- Line card ENTU 763C/FE, ENTU 763C/GE
Network Interface
- Connector type: SFP-LC
- ENTU 763S/FE: 100Base-FX SFP modules
- ENTU 763S/GE: 100Base-FX or 1000Base-X SFP modules
- Support SFP DDM (Digital Diagnostic Monitoring)
- Temperature, Voltage, Current, Tx Power, Rx Power
- Support 1000Base-LX, 20Km, Dual WDM, for redundant fibre link protection
- For detailed wavelength and distance of SFP modules, please refer to the SFP Transceivers datasheet
User Interface
- Connector type: Shield RJ-45 jack
- ENTU 763S/FE: 10Base-T/100Base-Tx
- ENTU 763S/GE: 10Base-T/100Base-Tx/1000-BaseT
- Auto-MDI/MDIX detection
- Auto-negotiation for speed and duplex
- Full duplex / Half duplex support
- Support copper line cable diagnostics feature
- Complies with IEEE 802.1q Tag VLAN (including Q-in-Q)
- Ethernet bandwidth control and support Jumbo frame
Management & OAM Functions
- Configuration via craft port VT-100 and WEB GUI
- Console: RJ45 connector (RS232C)
- HTTP firmware upgrade
- RMON counter
- Front-panel test button for easy loop healthy testing
- Reset button back to factory default
- Support IEEE 802.3ah Link Layer OAM
- Auto-discovery
- Link monitoring
- Remote loopback test
- Remote fault detection
- Link Fault Reflection
- Dying Gasp
- Critical Event
- Support TS-1000 OAM
- Loopback test
- Reset remote device
- Get remote device information
- Remote port setting
LED Indicators
- ENTU series:
PWR, LNK, CO, TST, TP, RF, LAN LNK/SPD
Power Requirement
- AC/DC, DC/DC external power adapter (12V, 0.5A)
- Power consumption:
ENTU 763S/FE = 1.8W
ENTU 763S/GE = 3.3W
Dimension
- ENTU 763S: 87(W) x 172(D) x 24(H) mm
Operating Environment
- Operation Temperature: 0 oC ~ 50 oC
- Storage Temperature: -20 oC ~ 70 oC
- Humidity: 90%, non-condensing
Application
