TAINET’s ONT 970/1GE is a GPON-technology-based gateway ONT designed for home and SOHO (small office and home office) users. It is designed with one optical interface which is compliant with ITU-T G984.X and ITU-T G.988 standards. The fiber access provides high-speed data channels and meets FTTH requirements, which can provide enough bandwidth supports for a variety of emerging network services. It supports the PON transmission rate of downlink 2.5Gbp/ uplink 1.25Gbps. Connected with TAINET OLTs, it can realize 1:128 splitting ratio. The covering radius of the network can reach to 20km.



  • Including VLAN, STP, port isolation, ACL, QoS and Broadcast Storm Control
  • Supports DBA and Rate-Limit
  • Supports advanced dynamic bandwidth distribution and accurate bandwidth limit, which enables users to share 2.5Gbps bandwidth resource appropriately
  • Supports QOS function, which guarantees a reliable service quality and service priority
  • Supports the standard OMCI defined by ITU-T, including configuration, alarm, performance monitoring, fault isolation and security management


  • ONT 970/1GE: 1*Gigabit Ethernet
PON Interface
  • Downlink 2.5Gbps / Uplink 1.25Gbps
  • Network covering radius: 20km
  • Type of optical interface: SC/UPC
  • Hi-sensible optical receiver: ≤- 27dBm
  • Radiation power: 0.5 ~ 5dBm
  • Security: ONU authentication mechanism
  • ITU-T G.984/G.988
  • IEEE 802.1D Spanning Tree
  • IEEE 802.1Q VLAN
  • IEEE 802.1w RSTP
  • ITU-T Y.1291
  • Port based VLAN
  • IEEE 802.1Q VLAN
  • IGMP Snooping
  • MLD-Snooping
  • Backpressure flow control (half duplex)
  • IEEE 802.3x flow control (full duplex)
  • Head of Line (HOL) mechanism
  • IEEE 802.1p CoS
  • Four priority queues on each port
  • WR SP and FIFO
  • Port rate limit
  • Loop detection
  • Dying – Gasp
  • Limitation to the number of MAC addresses on the port
  • Port protection
  • Port storm control
  • CLI, Web, SNMP and Telnet
  • Software upgrade through TFTP and Web
  • Local syslog or server syslog
  • 105(W) x 75(D) x 26(H) mm
Heat Dissipation
  • Supports long-time use
  • The device running hot will not affect the performance or cause break down
Operating Environment
  • Operating temperature: 0℃ ~ 45℃; 10% ~ 85% non-condensation
  • Storage temperature: -40℃ ~ 80℃; 5% ~ 95% non-condensation
Power Supply
  • DC 12V / 0.5A (external adaptor power supply)
Power Consumption
  • < 6W